A Step-by-Step Guide on How to Replace Your Water Filter (It’s EASY as 1-2-3!)
Have you been putting off replacing your water filter because you think it’s too complicated? Well, we’re happy to tell you that it’s actually a piece of cake! In this article, we’ll guide you through the simple steps on how to replace your water filter in a water filter and fridge.
1. Determine the Type of Filter You Have
Before you go and buy a new filter, it's important to check what type of filter you currently have. In case you don't know, there are several types of filters out there and standard sizes can differ. You can either check the manual or look it up online to see what replacement filter is compatible with your system.
2. Shut Off The Water Supply
The next step is to turn off the water supply. You wouldn't want flooding to happen while replacing your water filter right? So make sure you find the valve that shuts off the water supply.
3. Locate and Remove the Filter
Now, locate the filter on your system. Depending on the system, the location might be different. However, if you're unsure of the location, you can consult the manual for instructions. Once you've located the filter, gently remove it. Some filters require unscrewing, while others just need to be pulled out.
4. Insert the New Filter
Remove the packaging from the new filter. Insert the new filter gently into the filter housing. Ensure that the arrows on the filter are pointing in the right direction, and align it with the filter housing. With some filters, you'll need to tighten it by turning it to secure it in place.
5. Turn the Water Supply Back On
After inserting the new water filter, it's time to turn the water supply back on. Check for any leaks around the filter and tighten the filter housing if necessary.
We hope this guide has shown you how simple it is to replace your water filter in a water filter and fridge. By following these five easy steps, you can enjoy clean and fresh-tasting water without any worry. Just remember to check the manual for the type of filter you need, shut off the water supply, locate and remove the filter, insert the new filter, and turn the water supply back on. Now you're all set!
For a diverse selection of fridge and water filters, consider visiting the Fridge Filter Store.